Fabrication Material : including AISI 310,AISI 314,AISI 316,AISI316,LAISI 304,AISI314L, etc.
Application: Used in pharmacy, drying, chemical, glasses, electric, high temperature equipment, heat treat, transit and food industry, etc.
Material Selection :

AISI 304 : This steel provides significantly greater creep strength, rupture strength, and oxidation resistance. Type 304 is subject to carbide precipitation in the 800°F (426°C) to 1500°F(816°C) temperature range, which causes a lot of ductility, normally presents no problem. However, where there is a corrosive environment present, the use of Type 304 L is suggested.

AISI 316 : This alloy, which is normally considered a corrosion-resisting alloy, also possesses excellent properties for use at elevated temperatures. It provides not only greater resistance to corrosive environments at elevated temperatures, but also is significantly stronger than Type 304. It is subject to carbide precipitation and where there is a corrosive environment present, the use of Type 316 L is suggested.

AISI 314 : This alloy is extensively used for belts operating at temperatures up to 2100°F(1149°C). Its composition provides a high degree of oxidation resistance at high temperatures and good carburization resistance.

AISI 310 : This alloy is quite similar to Type314 except for a lower silicon content. It is used primarily where a relatively high chromium and nickel content is needed and the belt must withstand moist corrosion.